Reading the road
How well can you read the road?
Watching for changing road conditions and road direction is
essential to our survival. Color can help identify hazards such as
water, oil, antifreeze or a change in pavement. Texture can clue us
into other traction changes like gravel, sand, or broken pavement.
Another thing we need to do is learn to read the road for
directional changes. One of the most precise ways to do this is by
using the vanishing point in the road. When we are unable to see
completely through a corner what we find is the vanishing point. As
we look through the corner it will appear as if both sides of the
road come to a point (the point at which the road vanishes), this
point tells us what the road is about to do. It will tell us whether
the road is opening up or closing in on us. We can also use other
indicators for changes such as tree lines, traffic signs, painted
lines, other traffic or by reading the width of the road
approaching the vanishing point.
During Puget Sound Safety’s Advanced Street Skills course
taught at Pacific Raceways we teach an acronym called S-M-A-R-T
cornering. The first part of corning SMART is to Scan the
corner. We start by understanding what makes up the corner in front
of us so that we can read the road. There are two main things we are
scanning so that we can Mark our line… traction changes &
directional changes. What we want to learn here is to use
clues to determine what the road is going to do before we actually
see the exit. Our eyes should always be focused on where the road
disappears, also called the vanishing point... If there are three
corners visible it is the fourth corner we are trying to figure out.
What we can see, we know… it is what we can’t see that we want to plan
for. The idea is to stay in tune with the environment so that you
are less likely to be surprised with changes or hazards.
The radius of a corner describes the curve itself. This is
referred to as an increasing radius, decreasing radius or constant
radius. The line is our intended path of travel through the corner,
this is an imaginary line we create and then commit to. The apex is
the point that we come closest to the inside of the curve, where we
apex strongly effects our lean angle and exit point. We talk about
selecting a street line and apex as a separate lesson. For now we
want to learn to read the clues so we can effectively identify
changes in the direction and traction of the road. We want to
accurately predict what the road is going to do before we actually
see it.
Directional changes
One of the easiest ways to determine directional changes is to
use the vanishing point. We should always be searching for the next entry point…
In a corner without any obstructions, we can do this as long as we
KEEP OUR EYES UP. When we are unable to see completely through a
corner what we find is the vanishing point. Looking through the
corner it will appear as if both sides of the road come together to
form a point this is the vanishing point= the point at which the
road vanishes. The vanishing point can tell us what the road is
about to do. Once you use this technique you will find it very
simple. If the vanishing point appears to move away from us, then we know that the corner is an
increasing radius (opening up) and we can apex early and roll on the
throttle. If the vanishing point moves closer to us then the corner
is a decreasing radius (tightening up) and we will need to late apex
the corner. The last thing to watch for is if the vanishing point
remains constant (no movement)… this indicates a constant radius
corner. Next time you go for a ride, try practicing this. Watch the
outside edge of the road as it will give you a slightly farther view
and has a tendency to keep your eyes up higher. You always go where
you look so NEVER look down…
The vanishing point:
Increasing radius – the corner opens up
Decreasing radius- the corner closes in, or tightens up
Constant radius- the curve on the entry is the same as the
exit
Traffic lines can tell you what is about to happen also. If
the lines are double solid you can be pretty sure the corners will
continue with maybe some short straight-aways. However if you see
the lines begin to dash you can assume that the road is about to
straighten out and it is safe to add throttle if you so desire.
Beware of oncoming traffic doing late passing!
Signs include warnings, speed, and directional. Although the
signs posted on the public roads are based on the abilities of autos,
they should give you a clear indication of what to expect. Higher
speeds mean fewer crossroads and larger radius corners. Slower speeds
mean more corners, more hazards. Remember that the other users on the
roads are expecting traffic to be traveling near the posted limits
so if you come around a corner doubling the posted limits you may
find an unexpected surprise. As for warning signs and directional,
pay attention and alter your riding accordingly
Tree lines can’t be trusted completely but may give some idea
of what is to come. Often this method is helpful where there are
rises or in heavily-treed areas. If you look up towards the top of
the trees where the sky is visible you will see which direction the
road probably follows. If it goes in two directions or the trees
thin out, don’t count on them.
Don’t follow power lines; they often will lead in
directions that you don’t want to go.
Traction changes
Color and texture are two common indicators for changes in
traction.
Color can help identify surface hazards such as water, oil,
antifreeze or a change in pavement or indicate a change in the
material used to build and maintain the road.
Texture can clue us into other traction changes like gravel,
sand, or broken pavement. It can also indicate a change in material
used to surface the road, blacktop, chip-seal, or concrete. Each of
these building materials have differing traction properties.
Another indicator for directional change involve slope & bank
(camber). These also indicate how your traction and ground clearance
may be affected.
Since slope and bank also affect our traction they therefore
affect our chosen line through the corner. For this discussion we
will define slope as a rise or fall in the road and bank as "twist"
or camber.
Slope can be identified by the width of the road at the
vanishing point. If you look down the road that the vanishing point
come the sharp tip you know the road is flat or has a rise. If the
vanishing point is squared off there is a crest in the road and the
road will drop off on the other side. The wider the road at the
vanishing point the closer the drop. There is one more clue that
might help you when approaching a rise. If you look carefully at the
left and right edge of the road where it vanishes you may see a
slight point. This may be indicating an immediate turn as the road
crest… so be ready for it.
Bank (camber) is important to determine when corning as it
will effect traction and ground clearance. When you are looking
through a corner to the vanishing point take note to the road
leading up to it if it remains wide the road is likely banked into
the corner (good traction and ground clearance). If the road becomes
a thin line leading up to the vanishing point the road be poorly
banked, flat, or worse yet bank away from you.
Looking for more? Come join us at the track…
Quick reference:
Traction cues
Color & Texture
Posted warning signs
Environmental clues (shade, ice, standing water)
Weather conditions
Time of day/year
Directional cues
The vanishing point
Traffic lines
Signs
Tree lines
Don’t follow power lines
Watch the outside edge of the road
Color & Texture
Bret
Tkacs is the president of Puget Sound Safety, a Northwest company
that provides riding skills classes as well as do it yourself
maintenance
programs.
|